Glo-Protect PU Aliphatic Coat 1673
High-build, Two-component, High-Solids Acrylic Polyurathne Coat
Glo-Protek PU Aliphatic Coat 1673 is a high-build, two-component, high-solids acrylic polyurathne coating and it offers excellent resistance to atmospheric exposure conditions. It offers very good resistance to water and saline atmosphere. It also offers resistance to splash and spillage of mild chemicals and gives tough and abrasion resistant finish on curing
TECHNICAL DATA
Colour | Range |
---|---|
Finish | Satin-Eggshell |
Volume Solids | Approx. 64% |
Recommended DFT/COAT | 50 - 125 microns |
Mixing Ratio | 8 : 1 by volume |
Pot Life | 2 - 3 hours (30ºC) |
Theoretical spreading rate | 12.80 - 5.10 m /l at above DFT |
Touch Dry | 1 - 1.5 hours at 30ºC |
Hard Dry | 16 hours |
Fully cured | 7 days at 30ºC |
Overcoating Interval | Min: 16 hours; Max: 7 days |
Flash point | Above 27ºC |
Thinner | PU thinner |
Surface Preparation
The substrate surface/previous coat should be dry and free from all surface contaminations. The indicated maximum recoating interval refers to over-coating with itself. However, if applied over old painted surface, then the substrate surface should be roughened sufficiently before applying the coat.
Method of Application
By Air Spray, Airless Spray, Brush
A two-coat application is recommended to achieve optimum results when applied by brush.
Standard Packing
18-litre drums
Storage:
Store in sealed containers under cool and dry conditions.
Store in accordance with local regulations.
Health & Safety
As a general safety precaution, care should be taken to avoid contact of liquid paint with skin and eyes, and i confined spaces nhalation of solvent vapors or paint mist should be avoided. Air movement should be ensured with proper forced ventilation when applying the paint in . Skin, eye and respiratory protection is always recommended at all times while coating.