Glo-Protek Polyurethane based Wear Coat-244

A two component Surface-Tolerant coating based on Polysulfide modified epoxy resin incorporating zinc phosphate pigment and cured with Phenalkamine hardener.


The system is developed for concrete surfaces exposed to continuous UV and in open areas such as car parks , pavers etc. The system is a combination of water based moisture resistant 2 component primer followed by a 2 component Polyurethane wear coat with antiskid texture followed by a UV resistant polyurethane coat in glossy or MATT texture.

The surface is suitable for light vehicle movement, walking, etc.

Typical properties of the coating :

  • Abrasion resistance
  • Taber 75-80 mg loss using CS-17, 1000g,1000 cycles
  • Compressive strength : 600 kg/cm2
  • Hardness 80 shore D

Thickness : Including broadcast sand approx 1.5-2mm

Procedure : Application of water based 2 component primer followed by PU wear coat followed by sand broadcast followed by Polyurethane top coat – 2 coats.

Colours : All RAL shades available.

Packing : Pilfer proof HDPE containers in Kits.