Glo-Protek CleanUp Degreaser
A Versatile BIO-DEGRADABLE CARBON Cleaner
Glo-Protek CleanUp Degreaser is a water soluble, eco friendly, low viscosity, concentrated liquid suitably designed for cold degreasing. With its rapid formulation, it highly effective for removal of oil, grease, sludge or other dirts normally present in equipment, plant or other engineering components. It works as an excellent marine tank cleaner too, for on board ships previously carried either crude petroleum products or animal/vegetable oils etc.
To clean out crude oil and sludge deposits, grease bitumen, tar and pitch residues from crude oil storage tanks, process towers, filters, oil-well fittings and piping, drilling machinery and oil-well installation etc…
- Ideal for degreasing of machinery parts, metal components, automobile engines etc.
- Cleaning of garage floors, repair yards, walls etc.. from dirt and contaminated oils etc.
- To clean the jettys, platforms, tanks etc..
- Since, it also works on spray-on technique, ideal for cleaning huge machineries.
- It is a non corrosive and safe cleaning liquid
- Supreme emulsifying and cleaning properties due to powerful blend of non-ionic and anionic surfactants in combination with petroleum distillates.
- It is neutral in character and does not corrode plastic or metal parts.
|Appearance||Green coloured liquid|
|Odour||Mild pleasant fragrance|
|pH||Value approx 10 in concentrate|
|Flash point||79° C|
|Corrosive action||Non corrosive to metals.|
|Composition||7.25 m2/l @ 75 microns DFT|
|Dilution Ratio||Dilute 1 litre in 5 - 10 - 20 litre of water depending on surface condition|
Appearance : Green coloured liquid
Odour : Mild pleasant fragrance
pH : Value approx 10 in concentrate
Flash point : 79 Deg. C
Corrosive action : Non corrosive to metals.
Composition : 7.25 m2/l @ 75 microns DFT
Dilution Ratio : Dilute 1 litre in 5 - 10 - 20 litre of water depending on surface condition
Directions for Use
Glo-Protek CleanUp Degreaser gives a safer washing environment and a cost effective cleaner when a suitable cleaning method is adopted for the specific job. The product is so versatile with a high flash point, hence can be applied with conventional brushing, dipping or spraying technique.
The most economical method of cleaning can be archived for medium and small objects using a
proper dip tank bath. Either a carbon steel or aluminum tank can be fabricated. Dip the object to be
cleaning for 15-30 minutes, take it out and flush with jet or steam.
Always run the dipping operation in a ventilated area, away from naked flame or extreme heat source, do not heat the system more than 60 deg.C.
For larger objective that can not be moved easily, cleaning operation can be carried out by wiping technique. Depending on the character and thickness of the contamination, moisten a cloth or application with sufficient quantity for Glo-Protek CleanUp Degreaser and wipe dry.
For larger cleaning operation, spray the product directly on the object, allow to emulsify the dirt. Agitate with a brush or applicator, if necessary. allow to remain for 15-30 minutes and flush to clean. spraying is more effective and can avoid problems of dismantling of objects. It is particularly useful for cleaning areas which are inaccessible to wipping and brushing.
Glo-Protek CleanUp Degreaser can be brushed to clean objects, where the other methods are not practical. It can relatively simple, economic and more safe. Just brush on to the surface and after a while flush to clean.
FOR MACHINERY DEGREASING :
Use the product at full strength for optimum results. Apply the product directly on to the surface using a suitable cleaning method and allow the product to remain 15 – 20 minutes. Flush with water or steam jet. Removal of crude oil residues from storage tanks, pipes etc. can be effectively carried out using Glo-Protek CleanUp Degreaser.
FOR FLOOR CLEANING :
Use full strength for heavy contamination. Wet the surface of the floor by pouring or spraying. Agitate with a brush or suitable agitator and allow to remain for a while. Flush with water and clean. Coverage 1 Litre / m2. In case of light contamination Glo-Protek CleanUp Degreaser can be used along with petroleum distillate to obtain better coverage and cost effectiveness.
CLEANING OF COOLING SYSTEM :
Fill the cooling system with Glo-Protek CleanUp Degreaser and water at a dilution of 5 to 10 times, depends upon the contamination. Allow this liquid to circulate for 12 – 24 hours at elevated temperature of about 50 Deg. C. Drain and clean the system with large quantity of water. This operation is particularly useful for pipe line cleaning operation in process Industries, water treatment plants etc. For crude oil piping system, use full strength at room temperature.
STORAGE & HANDLING
Glo-Protek CleanUp Degreaser is a strong degreasing agent in petroleum distillate. Avoid prolonged
contact with skin. In case of contamination, flush with water to clean. In case of eye contact, flush with
large quantity of water and obtain immediate medical attention. Use protective gloves and face shield
during handling or spraying the product.
The product is having good storage stability. Does not get affected or deteriorated for storage upto 1 years. Store the product in a cool and dry place. Keep away from direct heat source and naked flame.
208 Ltr Drum - 25 Ltr plastic container