Glo-Protect Epoxy MIO 505 HB

Glo-Protek Epoxy MIO 505 HB Paint is Two-component, High Build intermediate composition containing Micaceous Iron Oxide (MIO) pigment. Recommended as an intermediate coat in protective coating system.

Typical Use

As an excellent inter-coat, where high degree of resistance is required to water, mild chemicals, sultry condition, abrasion and moisture etc. Typically used as a intermediate protective coating. It imparts a high degree of resistance to moisture, water & chemicals in saline condition.


Mixing Ratio 5:1 by volume
Pot Life 2-4 hrs (30º C)
Application Airless Spray, Air Spray, Brush
Nozzle Orifice 0.017” – 0.019”
Volume Solids Approx. 65%
Recommended DFT/COAT 50-125 Microns
Theoritical Spreading Rate
At Above DFT 13.200-5.28 M2 /Ltr at above DFT
Surface Dry 1-2 hours at 30º C
Hard Dry 24 Hrs.
Fully Cured 7 days at 30º C
Over Coating Interval Min: 24 Hrs.
Colour Red-Brown
Finish Matt-Egg Shell
Thinner Epoxy Thinner

Surface Preparation

A base coat of GPRC is required.

As a general rule, avoid inhalation of solvent vapor or paint mist and contact of paint with skin and eyes. Provide forced ventilation when working with solvent-borne coating in confined spaces or stagnant air. Skin and eye protection follow the local and national regulations.