Glo-Protek Paint Stripper

PAINT & VARNISH STRIPPERS

Paint stripping is an integral part of many metal cleaning operations. Glo-Protek offers following two series of paint & varnish strippers for the quick, efficient and economical removal of paint and varnish

PAINT STRIPPER - SP

Solvent based non acidic neutral paint strippers.

ORGANIC SOLVENT BASED - PAINT & VARNISH STRIPPERS

These are cold strip, non-acidic, neutral liquid paint & varnish strippers used in room temperature by immersion by immersion or brush method. Also available in viscous form. These products are highly effective in stripping paint and varnish from pretreated surfaces such as phosphate or anodised coatings They conform to I S. Standards.

A - PAINT STRIPPER - SP-500

For removal of synthetic, enamelled paint & varnish from, ferrous and non-ferrous metals within 5- 20 minutes. Used by cold dip method. The articles after removal of paint are washed with water.

B - PAINT STRIPPER - SP-600

Concentrated type used by cold dip brush method. Removes most of stoved enamelled. Vinyl, synthetic, epoxy, Duco within 1-1d5 minutes. Repainted surfaces are washed with water thereafter.

C - PAINT STRIPPER - SP-610

Jelly type highly concentrated paint stripper generally used for huge structure, steamers, bus bodies, pipelines, bridges, railway coaches etc. Removes paint within 1-10 minutes. Applied by brush method. Articles treated are washed with water.


ALKALINE PAINT STRIPPERS

These are alkaline powder / paste type paints remover used by hot cold immersion or brush methods. The inclusion of multimetal inhibitors in the formulation offers a higher degree of protection while stripping paint from Aluminium, brass, ferrous and most other metals. These products are highly effective paint removal with the bonus properties of no flash and low odour offering maximum in plant safety.

A - PAINT STRIPPER - AP-200

This is a highly effective Non Caustic based alkaline paint stripper used by hot immersion methods. It removes most of synthetic enamels, stoved oil. bound paints and primers.

Operation Recommendations :

  1. Prepare 10% solution with water.
  2. Heat the solution to 90ºC
  3. Immerse the painted work to be stripped for 10-15 minutes.
  4. Remove the work, rinse thoroughly in running water.
  5. Wipe the surface with cotton waste to remove the loosened paint layers.
  6. Dip the work in hot water (65-75ºC) and dry. When the stripping solution become too dirty, discard the complete solution.

BATH CONTROL :

10ml of cool bath solution in against 1N Sulfestic Acid Methyl Orange indicator. The endpoint will be yellow to pink reading should be 7ml.

REPLENISHMENT :

Add 1.4 kg of PAINT STRIPPER AP-200 per 100 It of bath for each ml lacking

A - PAINT STRIPPER - AP-220

Alkaline powder specially formulated for the removal of red oxide paint from the wagons.

APPLICATION :

50% solution is prepared with water and applied to surfaces by brush. The surfaces are washed with water after 10-30 minutes.

Equipment Notes :

Use mild steel tank with the immersion heaters for heating.

PRECAUTIONS :

  1. Use of PVC or Rubber gloves, goggles, aprons etc. is recommended
  2. Do not inhale solvent vapours as they are very irritating nature.
  3. Do not smoke in the vicinity of place of operations Keep the chemicals away from the fire.

PACKING :

PAINT STRIPPER - SP : 5, 20, 50 litres.
PAINT STRIPPER - AP : 5, 10, 40 Kgs.

STORAGE :

Six months from the date of manufacture.
Store under cool, dry & sheltered place away from direct sunlight, heat & water.